User's Manual Part 1
Table Of Contents
- contents
- Preface
- Product Overview
- Preparing for Installation
- Installing the Client Adapter
- Using the Profile Manager
- Configuring the Client Adapter
- Overview
- Setting System Parameters
- Setting RF Network Parameters
- Setting Advanced Infrastructure Parameters
- Setting Advanced Ad Hoc Parameters
- Setting Network Security Parameters
- Using EAP Authentication
- Performing Diagnostics
BETA DRAFT - CISCO CONFIDENTIAL
3-8
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 3 Installing the Client Adapter
Installing the Driver
Step 9 Enter or browse to the path where the driver is located (CD, floppy disk, or hard drive). If you are
installing the driver from the CD and your CD-ROM drive is drive D, the path should be D:\Win98.
Step 10 Click OK.
Step 11 Make sure the Cisco Systems wireless LAN adapter is selected in the Select Device screen and click OK.
The wizard finds the installation files and displays the search results.
Step 12 When the client adapter driver is displayed, click Next to copy the required files.
Step 13 During driver installation, you may be prompted to enter a path to the Windows 98 operating system
files. If so, do one of the following:
• If the Windows 98 operating system files are installed on your computer, they are usually located in
the C:\Windows\Options\Cabs folder. Type C:\Windows\Options\Cabs in the Copy files from
dialog box. Click OK to copy the required files.
• If Windows 98 prompts for the Windows 98 operating system CD, insert this CD into your
computer’s CD-ROM drive. If your CD-ROM drive is drive D, the path in the dialog box should be
D:\Win98. Click OK to copy the required files.
Step 14 The Add New Hardware Wizard window opens and indicates that the installation is complete. Click
Finish.
Step 15 When prompted to restart your computer, remove the CD or floppy disk (if installed) and click Yes.
Step 16 When the computer restarts, double-click My Computer, Control Panel, and Network.
Step 17 Select the Cisco Systems wireless LAN adapter and click Properties.
Step 18 In the client adapter Properties window, click the Advanced tab.
Step 19 Select Client Name. Type your computer’s unique client name, which can be obtained from your system
administrator, in the Value dialog box.
Step 20 Select SSID. Type your RF network’s (case-sensitive) SSID, which can be obtained from your system
administrator, in the Value dialog box.
Step 21 Click OK.
Step 22 If your computer is not connected to a DHCP server and you plan to use TCP/IP, double-click My
Computer, Control Panel, and Network. Select TCP/IP > Cisco Systems Wireless LAN Adapter.
Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and
default gateway address of your computer (which can be obtained from your system administrator).
Click OK.
Step 23 In the Network window, click OK.
Step 24 When prompted to restart your computer, click Yes.
The driver installation is complete.