User's Manual Part 1

BETA DRAFT - CISCO CONFIDENTIAL
3-12
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 3 Installing the Client Adapter
Installing the Driver
Step 24 If you are prompted to restart your computer, click Yes.
The driver installation is complete.
Installing the Driver for Windows Millennium Edition (Me)
The first release of Windows Me comes with driver version 6.15, which is installed automatically the
first time you insert a client adapter. To upgrade to the driver on the CD that shipped with your client
adapter or on Cisco.com, follow these steps.
Step 1 If you are installing the driver from Cisco.com, follow the steps below. If you are installing the driver
from the CD that shipped wih your client adapter, go to Step 2.
a. Use the computer’s web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
b. Locate the section for client adapter drivers and utilities.
c. Click the link for individual Windows files.
d. Select the latest driver file for Windows Me and your client adapter type.
Note The drivers for PC, LM, and PCI cards are labeled PCM-LMC-PCI; the drivers for mini PCI
cards and PC-Cardbus cards are labeled MPI-CB.
e. Read and accept the terms and conditions of the Software License Agreement.
f. Select the driver file to download it.
g. Save the file to a floppy disk or to your computer’s hard drive.
h. Locate the file using Windows Explorer, double-click it, and extract its files to a folder.
i. Go to Step 2.
Step 2 Follow the instructions in Chapter 8 to insert the client adapter into your computer. The instructions vary
by operating system and are different for PC cards, PC-Cardbus cards, and PCI cards.
Step 3 Insert the CD that shipped with your client adapter or a floppy disk containing the latest driver into your
computer, unless you are installing the driver from your computer’s hard drive.
Step 4 Double-click My Computer, Control Panel, and System.
Step 5 Click the Device Manager tab.
Step 6 Double-click Network Adapters.
Step 7 Select the Cisco Aironet wireless LAN adapter. Click Properties.
Step 8 In the client adapter Properties window, click the Driver tab.
Step 9 Click Update Driver. The Update Device Driver Wizard window appears.
Step 10 Select Specify the location of the driver (Advanced) and click Next.
Step 11 Select Search for a better driver than the one your device is using now (Recommended).
Step 12 Make sure the Removable Media checkbox is deselected.
Step 13 Select the Specify a location checkbox and click Browse.