User's Manual Part 1
Table Of Contents
- contents
- Preface
- Product Overview
- Preparing for Installation
- Installing the Client Adapter
- Using the Profile Manager
- Configuring the Client Adapter
- Overview
- Setting System Parameters
- Setting RF Network Parameters
- Setting Advanced Infrastructure Parameters
- Setting Advanced Ad Hoc Parameters
- Setting Network Security Parameters
- Using EAP Authentication
- Performing Diagnostics
BETA DRAFT - CISCO CONFIDENTIAL
Contents
vi
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Using LEAP with a Manually Prompted Login 6-8
After Profile Selection 6-8
After a Reboot/Logoff/Card Insertion 6-8
After Your LEAP Credentials Expire 6-10
Using LEAP with a Saved Username and Password 6-10
After Profile Selection/Card Insertion 6-10
After a Reboot/Logoff 6-11
After Your LEAP Credentials Expire 6-11
Using Host-Based EAP 6-11
After Profile Selection/Card Insertion 6-11
EAP-TLS 6-12
EAP-MD5 6-12
After a Reboot/Logoff 6-12
EAP-TLS 6-12
EAP-MD5 6-13
CHAPTER
7 Performing Diagnostics 7-1
Overview of ACU Diagnostic Tools 7-2
Setting Parameters that Affect ACU Diagnostic Tools 7-2
Viewing the Current Status of Your Client Adapter 7-4
Viewing Statistics for Your Client Adapter 7-12
Viewing the Link Status Meter 7-16
Running an RF Link Test 7-18
CHAPTER
8 Routine Procedures 8-1
Inserting and Removing a Client Adapter 8-2
Inserting a Client Adapter 8-2
Inserting a PC Card or PC-Cardbus Card 8-2
Inserting a PCI Card 8-3
Removing a Client Adapter 8-4
Removing a PC Card or PC-Cardbus Card 8-4
Removing a PCI Card 8-4
Upgrading the Firmware 8-5
Determining the Firmware Version 8-5
Loading New Firmware 8-6