User's Manual Part 1
Table Of Contents
- contents
- Preface
- Product Overview
- Preparing for Installation
- Installing the Client Adapter
- Using the Profile Manager
- Configuring the Client Adapter
- Overview
- Setting System Parameters
- Setting RF Network Parameters
- Setting Advanced Infrastructure Parameters
- Setting Advanced Ad Hoc Parameters
- Setting Network Security Parameters
- Using EAP Authentication
- Performing Diagnostics
BETA DRAFT - CISCO CONFIDENTIAL
5-34
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Disabling LEAP or Host-Based EAP
If you ever need to disable LEAP or host-based EAP for a particular profile, follow the instructions
below for your EAP authentication type.
Disabling LEAP
To disable LEAP for a particular profile, select None from the Network Security Type drop-down box
on the Network Security screen in ACU, click OK, and click OK or Apply on the Profile Manager
screen.
Disabling Host-Based EAP
To disable host-based EAP (EAP-TLS or EAP-MD5) for a particular profile, follow the steps below:
Step 1 Select None from the Network Security Type drop-down box on the Network Security screen in ACU
and click OK.
Step 2 Click OK or Apply on the Profile Manager screen.
Step 3 On your computer desktop, double-click My Computer, Control Panel, and Network Connections.
Step 4 Right-click Wireless Network Connection.
Step 5 Click Properties. The Wireless Network Connection Properties screen appears.
Step 6 Click the Authentication tab.
Step 7 Deselect the Enable network access control using IEEE 802.1X checkbox.
Step 8 Click OK.