User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
8-10
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 8 Routine Procedures
Driver Procedures
Step 10 Double-click My Computer, Control Panel, Network, and Adapters.
Step 11 Select the Cisco Systems wireless LAN adapter.
Step 12 Click the Update button.
Step 13 In the Windows NT Setup window, enter the path to where you extracted the files and click Continue.
Step 14 Follow the instructions on the screen to complete the upgrade process.
Upgrading the Driver for Windows 2000
Step 1 Use your computer’s web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2 Locate the section for client adapter drivers and utilities.
Step 3 Click the link for individual Windows files.
Step 4 Select the latest driver file for Windows 2000 and your client adapter type.
Note The drivers for PC, LM, and PCI cards are labeled PCM-LMC-PCI; the drivers for mini PCI
cards and PC-Cardbus cards are labeled MPI-CB.
Step 5 Read and accept the terms and conditions of the Software License Agreement.
Step 6 Select the driver file to download it.
Step 7 Save the file to a floppy disk or to your computer’s hard drive.
Step 8 Locate the file using Windows Explorer, double-click it, and extract its files to a folder.
Step 9 Make sure your client adapter is installed in your computer.
Step 10 Double-click My Computer, Control Panel, and System.
Step 11 Click the Hardware tab and Device Manager.
Step 12 Double-click Network Adapters and the Cisco Systems wireless LAN adapter.
Step 13 Click the Driver tab.
Step 14 Click the Update Driver button.
Step 15 The Update Device Driver Wizard window appears. Click Next.
Step 16 Select Display a list of the known drivers for this device so that I can choose a specific driver and
click Next.
Step 17 Click Have Disk.
Step 18 Enter or browse to the path where you extracted the files and click OK.
Step 19 A message appears indicating that the system is ready to install the new driver. Click Next and Finish.
The driver upgrade is complete, and the old driver is overwritten by the new one.