User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
Index
IN-3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
C
CAM
See Constantly Awake Mode (CAM)
Canadian compliance statement
C-3
Cancel button, function 1-7
Card and Socket Services 2-4
carrier/correlation (Car/Cor) 5-12
caution, defined xiii
channel
current
7-9
determining if clear 5-12
in site survey active mode F-13
in site survey passive mode F-7
Channel parameter 5-10
channels, supported by regulatory domains D-2, D-3
channel set, for which client adapter is configured 7-8
Clear Channel Assessment parameter 5-12
client name 7-8
Client Name parameter 5-4
client utility
See Aironet Client Utility (ACU)
clock, setting to display seconds
1-6
collisions, multiple/single 7-15
Commands drop-down menu 6-9
configuring client adapter
deciding between ACU and Windows XP
3-15
in ACU 5-1 to 5-34
in Windows XP E-4 to E-10
Constantly Awake Mode (CAM) 5-5
Contents ACU menu option 9-15
Continuous Link Test parameter
in RF link test
7-19
in site survey active mode F-8
conventions of document xiii to xiv
CRC error
in packet
7-13
in PLCP header 7-13
Create ACU Icon on your Desktop parameter, in ACU
installation program
3-18, 8-20, 8-23
CTS packets
number received
7-16
number transmitted 7-15
D
data rate
for which client adapter is configured
7-9
mismatches 7-14
specifications A-4
when performing a site survey F-2
Data Rate parameter
in RF network
5-8
in site survey active mode F-9
Data Retries parameter
in RF network
5-13
in site survey active mode F-9
dBm
signal strength units in site survey
F-3
signal strength units on Status and Linktest screens 7-4
declarations of conformity
European community, Switzerland, Norway, Iceland,
and Liechtenstein
C-4 to C-5
FCC C-2
RF exposure C-6
Defaults button, function 1-7
default values, displaying 1-7
Delay Between Packets parameter F-10
Destination Is Another Cisco/Aironet Device
parameter
F-9
Destination MAC Address parameter F-8
diagnostic tools
overview
7-2
setting parameters 7-2 to 7-4
using 7-4 to 7-22
dipole antenna 1-4, B-3
Display Seconds on Clock parameter 1-6