User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
8-14
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 8 Routine Procedures
Driver Procedures
Step 13 Click View, Options or Folder Options, and View. Under Hidden files, make sure Show all files is
selected, make sure the Hide file extensions for known file types checkbox is deselected, and click
OK.
Step 14 Find your computer’s operating system in the following table, go to the path listed, and delete the file
indicated.
Step 15 Remove the CD from your computer’s CD-ROM drive.
Step 16 Shut down your computer.
Step 17 Remove the client adapter.
Uninstalling the 6.10 Driver for Windows NT
Step 1 Make sure the previous client adapter is in your computer and the computer is booted up.
Step 2 Right-click the WepStat icon in the system tray on your desktop. This icon looks like two connected
computers.
Step 3 Click Terminate.
Step 4 Insert the CD that contains the 6.10 driver into your computer’s CD-ROM drive.
Step 5 Open Windows Explorer and find the \Utilities\RmWep directory on your computer’s CD-ROM drive.
Step 6 Double-click the RmWep.exe file.
Step 7 Close Windows Explorer.
Step 8 Double-click My Computer, Control Panel, and Network.
Step 9 In the Network window, click the Adapters tab.
Step 10 Select the Cisco Systems wireless LAN adapter.
Step 11 Click Remove.
Step 12 When asked if you wish to continue, click Yes and Close.
Step 13 When prompted to restart your computer, click No.
Step 14 Remove the CD from your computer’s CD-ROM drive.
Step 15 Shut down your computer.
Step 16 Remove the client adapter.
Operating System Location of File File to be Deleted
Windows 95 C:\Windows\Inf pc4800.inf
Windows 98 C:\Windows\Inf or
C:\Windows\Inf\Other
pc4800.inf or
aironetnetx500.inf