User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
8-18
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 8 Routine Procedures
ACU Procedures
Uninstalling the Driver for Windows XP
Note This procedure will not uninstall the driver that was bundled with Windows XP. It will
uninstall only drivers to which you have upgraded. When you follow the steps below to
uninstall an upgraded driver and then eject and reinsert the card, Windows finds the original
driver and reinstalls it automatically.
Note These instructions assume you are using Windows XP’s classic view rather than its category
view.
Step 1 Double-click My Computer, Control Panel, and System.
Step 2 Click the Hardware tab and Device Manager.
Step 3 Double-click Network Adapters and Cisco Systems 3x0 Series Wireless LAN Adapter.
Step 4 Click the Driver tab and the Uninstall button.
Step 5 A warning appears indicating that you are about to uninstall the client adapter from your system. Click
OK.
ACU Procedures
This section provides instructions for the following procedures:
• Opening ACU, see below
• Exiting ACU, see 8-19
• Modifying ACU installation settings, see 8-19
• Determining the version of ACU, see 8-21
• Upgrading ACU, see 8-22
• Uninstalling ACU, see 8-24
• Deleting the ACU icon from the desktop, see 8-25
Opening ACU
To open ACU, perform one of the following:
• Double-click the Aironet Client Utility (ACU) icon on your desktop.
• Select Aironet Client Utility (ACU) from the folder in the Windows Start Menu that you chose
during installation [the default location is Start > Program Files > Cisco Aironet > Aironet Client
Utility (ACU)].
• Double-click My Computer > Control Panel > Aironet Client Utility.