User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
8-19
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 8 Routine Procedures
ACU Procedures
Exiting ACU
To exit ACU, select Exit from the Commands drop-down menu (see Figure 8-4).
Figure 8-4 Commands Drop-Down Menu
Modifying ACU Installation Settings
Follow the steps below if you need to change any of the settings selected during ACU installation (for
example, selecting LEAP or the location of the ACU program files).
Step 1 Close any Windows programs that are running.
Step 2 Select Start > Run, browse or enter the path to the installed ACU files (the default location is
C:\Program Files\Cisco Aironet\setup.exe), and click OK. The Welcome screen for the Aironet Client
Utility setup maintenance program appears.
Step 3 Select Modify and click Next. The installation goes through the same sequence of screens that appeared
during the initial installation to allow you to select or deselect various options. The following steps walk
you through the remaining screens.