User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
8-20
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 8 Routine Procedures
ACU Procedures
Step 4 In the Select Options screen, select as many of the following options as desired and click Next:
Step 5 In the Choose Destination Location screen, perform one of the following:
• If you want the ACU program files to be installed in the default location (C:\Program Files, if
C:\Program Files is the default Windows program file folder), click Next.
• If you want to specify a different destination location for the ACU program files, click Browse,
select a location, and click Next.
Step 6 In the Select Program Folder screen, specify a program folder name for ACU by selecting from the list
of existing folders (the default name is Cisco Aironet) or typing in a new folder name; then click Next.
A status screen displays the progress of the installation. Then the Setup Complete screen appears.
Step 7 If your computer needs to be rebooted, select Yes, I want to restart my computer now or No, I will
restart my computer later and click Finish.
Note If you are prompted to reboot your computer, Cisco recommends that you select the Yes, I
want to restart my computer now option.
The client utility installation has been modified.
Option Description
LEAP Enables you to create a profile in ACU that uses LEAP authentication.
If this option is not selected now and you later want to use LEAP, you
must run this installation program again, select Modify, and select this
option.
Note Refer to Chapter 5 for information on using LEAP.
Note If you select LEAP on a Windows 95, 98, or 98 SE device,
Microsoft hot fixes are installed during ACU installation to fix
two problems related to the use of LEAP. Refer to Chapter 9 for
more information on the hot fixes.
Note If you select LEAP on a Windows XP device, you cannot use
Windows XP’s fast user switching feature.
Allow Saved LEAP User
Name and Password
Enables you to create a profile in ACU that uses a saved (rather than
temporary) username and password for LEAP authentication. When
such a profile is used, the saved username and password are used to
start the LEAP authentication process, and you are not prompted to
enter them.
Note This option is available only if the LEAP option is selected.
Create ACU Icon on your
Desktop
Causes the installation program to add an ACU icon to your computer’s
desktop to provide quick access to the utility.
Allow Non-Administrator
Users to use ACU to modify
profiles
Enables users without administrative rights to modify profiles in ACU
on computers running Windows NT, 2000, or XP.
Note This option is not available for Windows 95, 98, and Me
because these versions of Windows do not support different
classes of users.