User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
A-3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Appendix A Technical Specifications
Altitude Operational
9843 ft (3000 m) @ room temperature for
2 hours
Non-operational
15,000 ft (4572 m) @ room temperature for
20 hours
ESD 15 kV (human body model)
Radio Specifications
Type
2.4-GHz client adapters Direct-sequence spread spectrum (DSSS)
IEEE 802.11b compliant
5-GHz client adapters Orthogonal frequency division multiplexing (OFDM) IEEE 802.11a
compliant
Power output
Note Refer to Appendix D for limitations on radiated power (EIRP) levels in the European
community and other countries.
Note If you are using an older version of a 340 or 350 series client adapter, your power level options
may be different than those listed here.
350 series client adapters 100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
340 series PC card 30 mW (15 dBm)
1 mW (0 dBm)
340 series LM card and
PCI card
30 mW (15 dBm)
15 mW (12 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
PC-Cardbus card 20 mW (13 dBm)
10 mW (10 dBm)
5 mW (7 dBm)
Note These values are based on the FCC peak measurement
method as defined in FCC 15.407(a)(4).
Operating frequency
2.4-GHz client adapters 2.400 to 2.497 GHz (depending on the regulatory domain in which
the client adapter is used)
5-GHz client adapters 5.15 to 5.25 GHz in the UNII 1 band*
5.25 to 5.35 GHz in the UNII 2 band*
*Depending on the regulatory domain in which the client adapter is
used
Table A-1 Technical Specifications for Cisco Aironet Client Adapters (continued)