User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL

E-4

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows

OL-1394-03

Appendix E Configuring the Client Adapter through Windows XP

Configuring the Client Adapter

Follow the steps below to configure your client adapter using Windows XP.

Note If you installed ACU but intend to use Windows XP to configure the client adapter, open

ACU and make sure the Allow Windows To Configure My Wireless Network Settings

option is selected on the Profile Manager screen.

Note These instructions assume you are using Windows XP’s classic view rather than its category

view.

Step 1 Make sure the client adapter’s driver has been installed and the client adapter is inserted into the

Windows XP device.

Step 2 Double-click My Computer, Control Panel, and Network Connections.

Step 3 Right-click Wireless Network Connection.

Step 4 Click Properties. The Wireless Network Connection Properties screen appears.

Step 5 Select the Wireless Networks tab. The following screen appears (see Figure E-1).

Figure E-1 Wireless Network Connection Properties Screen (Wireless Networks Tab)