User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
E-7
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Appendix E Configuring the Client Adapter through Windows XP
Configuring the Client Adapter
Step 14 Click OK to save your settings and to add this SSID to the list of preferred networks (see Figure E-1).
The client adapter automatically attempts to associate to the network(s) in the order in which they are
listed.
Step 15 If you are planning to use EAP-TLS or EAP-MD5, follow the instructions in either the “Enabling
EAP-TLS Authentication” section on page E-7 or the “Enabling EAP-MD5 Authentication” section on
page E-9.
Enabling EAP-TLS Authentication
Follow the steps below to prepare the client adapter to use EAP-TLS authentication, provided you have
completed the initial configuration.
Step 1 Click the Authentication tab on the Wireless Network Connection Properties screen. The following
screen appears (see Figure E-3).
Figure E-3 Wireless Network Connection Properties Screen (Authentication Tab)
Step 2
Select the Enable network access control using IEEE 802.1X checkbox.
Step 3 For EAP type, select Smart Card or other Certificate.
Step 4 Click Properties. The Smart Card or other Certificate Properties screen appears (see Figure E-4).