User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
F-7
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Appendix F Performing a Site Survey
Using Active Mode
Step 2 If you want to activate the site survey active mode, go to the “Using Active Mode” section below.
Otherwise, click OK or Cancel to exit the site survey application.
Using Active Mode
Follow the steps below to activate the site survey active mode and obtain current information about your
client adapter’s ability to transmit and receive RF packets.
Step 1 From the Site Survey - Passive Mode screen (see Figure F-1), click the Setup button. The Site Survey
Active Mode Setup screen appears (see Figure F-3).
Access Point IP Address The IP address of the access point to which your client adapter is
associated. It is shown only if the access point was configured
with an IP address and your client adapter is in infrastructure
mode.
Channel (Frequency) The frequency that your client adapter is currently using as the
channel for communications.
Value: Dependent on client adapter radio and regulatory
domain
Table F-1 Site Survey Passive Mode Statistics (continued)
Statistic Description