User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL
F-8
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Appendix F Performing a Site Survey
Using Active Mode
Figure F-3 Site Survey Active Mode Setup Screen
Table F-2 lists and describes the parameters that affect how the site survey is performed. Follow the
instructions in the table to set any parameters.
Table F-2 Site Survey Active Mode Parameters
Parameter Description
Destination MAC Address The MAC address of the access point (in infrastructure mode) or other
clients (in ad hoc mode) that will be used in the test.
Default: The MAC address of the access point (in infrastructure mode)
to which your client adapter is associated
Note During the test, the client adapter will not roam to other access
points so that the size of a single cell can be determined.
Continuous Link Test Selecting this checkbox causes the test to run until you click OK or
Stop. The test loops repeatedly for the number of packets specified in
the Number of Packets field.
Default: Deselected