User's Manual Part 2

BETA DRAFT - CISCO CONFIDENTIAL

8-9

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows

OL-1394-03

Chapter 8 Routine Procedures

Driver Procedures

Step 4 Select the latest driver file for Windows 95 or Windows 98 and your client adapter type.

Note The drivers for PC, LM, and PCI cards are labeled PCM-LMC-PCI; the drivers for mini PCI

cards and PC-Cardbus cards are labeled MPI-CB.

Step 5 Read and accept the terms and conditions of the Software License Agreement.

Step 6 Select the driver file to download it.

Step 7 Save the file to a floppy disk or to your computer’s hard drive.

Step 8 Locate the file using Windows Explorer, double-click it, and extract its files to a folder.

Step 9 Make sure your client adapter is installed in your computer.

Step 10 Double-click My Computer, Control Panel, and System.

Step 11 Click the Device Manager tab.

Step 12 Double-click Network Adapters.

Step 13 Select the Cisco Systems wireless LAN adapter.

Step 14 Click Properties, the Driver tab, and the Change Driver or Update Driver button.

Step 15 The Update Device Driver Wizard window appears. Click Next.

Step 16 Select Search for a better driver than the one your device is using now (Recommended) and click

Next.

Step 17 Select the location of the new driver (floppy disk drive or specify a location), deselect the other options,

enter the full path to where you extracted the files, and click Next.

Step 18 A message appears indicating that the system is ready to install the new driver. Click Next and Finish.

The driver upgrade is complete, and the old driver is overwritten by the new one.

Upgrading the Driver for Windows NT

Step 1 Use your computer’s web browser to access the following URL:

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Step 2 Locate the section for client adapter drivers and utilities.

Step 3 Click the link for individual Windows files.