Installation Guide

Draft Copy - CISCO CONFIDENTIAL
5-7
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-2155-02
Chapter 5 2.4-GHz Radio Upgrade
Installing a 2.4-GHz Radio
Step 2 Grasp the radio card only on the edges, being careful not to touch components on the board or the gold
connector pins.
Step 3 Connect the black antenna wire connector to the radio card antenna connector marked by the black label
(see Figure 5-4).
Caution To avoid damaging the antenna wire assemblies, handle them by their connectors.
Figure 5-4 Antenna Connector Labels and Mini-PCI Connector
Step 4
Connect the white antenna wire connector to the radio card antenna connector marked by the white label
(see Figure 5-4).
MAIN AUX
74251
3
2
1
1 Antenna connector (black wire) 2 Antenna connector (white wire)
3 Mini-PCI connector