Quick Start Guide

FINAL DRAFT - CISCO CONFIDENTIAL
23
Mounting Instructions
You can mount the access point on any of the following surfaces:
Horizontal or vertical flat surfaces, such as walls or ceilings
Suspended ceilings
The access point ships with a detachable mounting bracket and the necessary
mounting hardware. Because it is detachable, you can use the mounting
bracket as a template to mark the positions of the mounting holes for your
installation. You then install the mounting bracket and attach the access point
when you are ready. Refer to the following illustration to locate the various
mounting holes for the method you intend to use.
Note If you plan to mount the access point in an area subject to
environmental air space, Cisco recommends that you mount the
access point horizontally so that its antennas are pointing down,
which results in the access point complying with regulatory
requirements for environmental air space.
12KDBQSG.bk Page 23 Friday, June 21, 2002 9:53 AM