Quick Start Guide
Table Of Contents
- Cisco One-Year Limited Hardware Warranty Terms
- Preface
- Introduction to the Access Point
- Unpacking the Access Point
- Installing the Access Point
- In Case of Difficulty
- Mounting Instructions
- Safety Information
- Compliance Information
FINAL DRAFT - CISCO CONFIDENTIAL
5
Preface
This guide is designed to help you install and minimally configure your Cisco
Aironet 1200 Series Access Point in a wireless Local Area Network (LAN).
Detailed installation and configuration information can be found in the Cisco
Aironet 1200 Series Access Point Hardware Installation Guide and Cisco
Aironet 1200 Series Access Point Software Configuration Guide, which are on
Cisco.com. Another document, Radio Upgrade Instructions: Cisco Aironet
1200 Series Access Points, is shipped with radio upgrade kits for 2.4- and
5-GHz radios.
Follow these steps to access these documents:
1. Browse to http://www.cisco.com.
2. In the Service & Support section, click Technical Documents. The
Cisco Documentation page appears.
3. Click Wireless. The Documentation page appears.
4. Click Aironet 1200 Series Wireless LAN Products. The Aironet 1200
Series Wireless LAN Products page appears.
5. Click Cisco Aironet 1200 Series Access Points. The Cisco Aironet
1200 Series Access Points page appears.
6. Click on the document you wish to open.
12KDBQSG.bk Page 5 Friday, June 21, 2002 9:53 AM