User's Manual
Table Of Contents
- Cisco Aironet 1200 Series Access Point Hardware Installation Guide
- Contents
- Preface
- Overview
- Installation
- Basic Configuration
- Mounting Instructions
- 2.4-GHz Radio Upgrade
- 5-GHz Radio Module Upgrade
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Console Cable Pinouts
- Glossary
- Index
Draft Copy - CISCO CONFIDENTIAL
3-13
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-2155-02
Chapter 3 Basic Configuration
Default Basic Settings
Default Basic Settings
Table 3-1 lists the default settings on the access point’s Express Setup screen.
Table 3-1 Default Settings on the Express Setup Screen
Parameter Default Value
System Name AP1200-xxxxxx (the last six characters of the
unit’s MAC address)
Terminal Type (on serial interface only) teletype
Config Server Protocol DHCP
IP address 10.0.0.1
IP Subnet Mask 255.255.255.0
Default Gateway 255.255.255.255
AP Radio: Internal (2.4-GHz radio)
SSID tsunami
Role in Radio Network Root Access Point
Optimize Radio Network For Throughput
AP Radio: Module (5-GHz radio)
SSID tsunami
Role in Radio Network Root Access Point
Optimize Radio Network For Throughput
Ensure Compatibility With (none selected)
SNMP Admin. Community (blank)