User's Manual
Table Of Contents
- Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
- Preface
- Overview
- Installation Overview
- Mounting and Alignment Overview
- Configuring the Bridge for the First Time
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Channels and Antenna Settings
- Glossary
- Index
DRAFT - CISCO CONFIDENTIAL
1-8
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
Chapter 1 Overview
Bridge Specifications
Subcarrier modulation BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 Mbps and 36 Mbps)
64-QAM (48 Mbps and 54 Mbps)
na
Data rates 6, 9, 12, 18, 24, 36, 48, and 54 Mbps na
Non-overlapping
channels
4na
Antenna Integrated antenna—22.5 dBi patch array
External antennas:
9 dBi omnidirectional
9.5 dBi sector
28 dBi dish
na
Range (typical) Point-to-Point orientation
• Two 22.5 dBi integrated antennas:
–
7.8 miles at 54 Mbps
–
15.5 miles at 6 Mbps
• Two 28 dBi dish antennas:
–
11.9 miles at 54 Mbps
–
23.4 miles at 6 Mbps
Point-to-Multipoint orientation
• 9 dBi omnidirectional antenna at the root
location and 22.5 dBi integrated antenna at the
non-root location:
–
2.0 miles at 54 Mbps
–
8.3 miles at 6 Mbps
• 9.5 dBi sector antenna at the root location and
22.5 dBi integrated antenna at the non-root
location:
–
2.2 miles at 54 Mbps
–
8.5 miles at 6 Mbps
• 9 dBi omnidirectional antenna at the root
location and 28 dBi dish antenna at the non-root
location:
–
3.0 miles at 54 Mbps
–
9.8 miles at 6 Mbps
• 9.5 dBi sector antenna at the root location and
28 dBi dish antenna at the non-root location:
–
3.4 miles at 54 Mbps
–
10.2 miles at 6 Mbps
na
Table 1-1 Bridge, Power Injector, and Power Module Specifications (continued)
Category Bridge Power Injector