User's Manual
Table Of Contents
- Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
- Preface
- Overview
- Installation Overview
- Mounting and Alignment Overview
- Configuring the Bridge for the First Time
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Channels and Antenna Settings
- Glossary
- Index
CHAPTER
DRAFT - CISCO CONFIDENTIAL
4-1
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
4
Configuring the Bridge for the First Time
This chapter describes how to configure basic settings on your bridge for the first time. The contents of
this chapter are similar to the instructions in the quick start guide that shipped with your bridge. You can
configure all the settings described in this chapter using the CLI, but it might be simplest to browse to
the bridge’s web-browser interface to complete the initial configuration and then use the CLI to enter
additional settings for a more detailed configuration.
This chapter contains these sections:
• Before You Start, page 4-2
• Obtaining and Assigning an IP Address, page 4-3
• Connecting to the Bridge Locally, page 4-3
• Assigning Basic Settings, page 4-4
• What To Do Next, page 4-8
• Using the IP Setup Utility, page 4-9
• Assigning an IP Address Using the CLI, page 4-12
• Using a Telnet Session to Access the CLI, page 4-12