User's Manual
Table Of Contents
- Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
- Preface
- Overview
- Installation Overview
- Mounting and Alignment Overview
- Configuring the Bridge for the First Time
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Channels and Antenna Settings
- Glossary
- Index
CHAPTER
DRAFT - CISCO CONFIDENTIAL
1-1
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
1
Overview
The Cisco Aironet 1400 Series Bridge (hereafter called the bridge) is a wireless device designed for
building to building wireless connectivity. Operating in the 5.8 GHz UNII 3 band (5725 to 5825 MHz),
derived from the 802.11a standard, the bridge delivers 6-54 Mbps data rates without the need for a
license. The bridge is a self contained unit designed for outdoor installations, providing differing
antenna gains as well as coverage patterns and supports both point-to-point and multipoint
configurations.
The bridge uses a browser-based management system, but you can also configure the bridge using Cisco
IOS commands or Simple Network Management Protocol (SNMP).
This chapter provides information on the following topics:
• Key Features, page 1-2
• Network Configuration Examples, page 1-5
• Bridge Specifications, page 1-6