User's Manual

DRAFT - CISCO CONFIDENTIAL
1-6
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
Chapter 1 Overview
Bridge Specifications
Figure 1-4 Port Aggregation or Redundancy Bridge Configuration
Point-to-Multipoint Configuration
The point-to-multipoint configuration (Figure 1-5) is used to interconnect the main LAN network to
multiple remote LAN networks.
Figure 1-5 Point-to-Multipoint Bridge Configuration
Bridge Specifications
The bridge, power injector, and power module specifications are listed in Table 1-1.
88834
Bridge Bridge
Bridge Bridge
88835
Bridge
Bridge
Bridge
Table 1-1 Bridge, Power Injector, and Power Module Specifications
Category Bridge Power Injector
Size Integrated antenna configuration:
11.6 in. W x 11.6 in. H x 3.6 in. D
29.46 cm W x 29.46 cm H x 9.14 cm D
External antenna configuration:
11.4 in. W x 11.4 in. H 4.2 in. D
28.96 cm W x 28.96 cm H 10.67 cm D
Power injector:
6.25 in. W x 6.38 in. H x 1.31 in. D
15.88 cm W x 16.21 cm H x 3.33 cm D
Power module:
6.0 in. W x 2.75 in. H x 1.75 in. D
15.24 cm W x 6.99 cm H x 4.45 cm D
Indicators Four indicators on the back panel: Installation and
Alignment Mode, Ethernet traffic, bridge status, and
radio traffic
Three indicators on the front panel: Uplink
activity, injector status, Ethernet activity
One indicator on the side panel: Power