User's Manual

DRAFT - CISCO CONFIDENTIAL
3-4
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
Chapter 3 Mounting and Alignment Overview
Bridge LED Indicators
Figure 1 LED and Connector Locations
When the bridge is initially powered-up, installation mode is activated and the bridge attempts to
associate to a root bridge for 60 seconds. If it is unable to associate with a root bridge, it automatically
assumes the root bridge role. The Install LED provides bridge association status during installation mode
as shown in Table 3-2.
1 Ethernet LED 3 Radio LED
2 Status LED 4 Install LED
4
1
3
2
88818
Table 3-2 Install LED Association Status
Install LED State Bridge State
Off Self test Startup
Amber blink Non-root, searching Not associated (non-root mode). The
bridge attempts to associate with a root
bridge for 30 seconds
1
.
1. Pre-configured bridges search indefinitely.
Amber solid Non-root, associated Associated (non-root mode)
Green blink Root, searching Not associated (root mode). The bridge
attempts to associate with a non-root
bridge indefinitely.
Green solid Root, associated Associated (root mode)