User's Manual

DRAFT - CISCO CONFIDENTIAL
5-6
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
Chapter 5 Troubleshooting
Power Injector LED Indicators
The power injector LED indicators are shown in Figure 5-1.
Figure 5-2 Power Injector LED Indicators
The power injector LED indications are shown in Table 5-5.
1 Power jack (+48VDC) 5 Ethernet port (RJ45 connector)
2 Power LED indicator 6 Ethernet Activity LED
3 Power injector dual-coax ports (F-Type connectors) 7 Injector Status LED
4 Mode button 8 Uplink Activity LED
88820
1
2
4
5
8
7
6
3
Ipsamy opsum
Ipsamy opsum
Ipsamy opsum
Table 5-5 Power Injector LED Indications
Uplink Activity Injector Status Ethernet Activity Description
- - Off Wired LAN Ethernet link is not active
- - Green Wired LAN Ethernet link is operational
- - Blinking Green Transmitting and receiving packets over the
wired LAN Ethernet link
- - Amber Power injector internal memory error
Off - - Link between power injector and bridge is not
active
Green - - Link between power injector and bridge is
operational
Blinking Green - - Transmitting and receiving Ethernet packets
between the power injector and the bridge
Amber - - Power injector internal memory error
- Green - Bridge successfully passed Power On Self Test
(POST) and loaded the IOS image
- Blinking Green - Bridge power is active and the bridge is loading
IOS image or POST operation has started