User's Manual

DRAFT - CISCO CONFIDENTIAL
vii
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
OL-4072-01
Preface
This section describes the objectives, audience, organization, and conventions of the Cisco Aironet 1400
Series Wireless Bridge Hardware Installation Guide.
Objectives
This publication explains the steps for initial setup and basic configuration of the Cisco Aironet 1400
Series Wireless Bridge (hereafter called bridge) supporting 5.8-GHz operation. This publication also
provides troubleshooting information and detailed specifications.
Audience
This publication is for the person installing and configuring a bridge for the first time. The installer
should be familiar with network structures, terms, and concepts.
Organization
This guide contains the following sections:
Chapter 1, “Overview,” describes the major components, features, and specifications of the bridge.
Chapter 2, “Installation Overview,” provides warnings, safety information, and information needed
before you begin the installation of your bridge system.
Chapter 3, “Mounting and Alignment Overview,” provides an overview of components and features used
during bridge mounting and antenna alignment operations.
Chapter 4, “Configuring the Bridge for the First Time,” describes how to enter basic bridge
configuration settings.
Chapter 5, “Troubleshooting,”provides solutions to potential problems encountered during setup.
Appendix A, “Translated Safety Warnings,” lists translations of the safety warnings in this publication.
Appendix B, “Declarations of Conformity and Regulatory Information,” describes the regulatory
conventions to which the bridge conforms and provides guidelines for operating bridges in Japan.
Appendix C, “Channels and Antenna Settings,” describes the channels and antenna settings supported
by the regulatory organizations.