User's Manual
Table Of Contents
- Cisco Aironet 1100 Series Access Point Hardware Installation Guide
- Contents
- Preface
- Audience
- Purpose
- Organization
- Conventions
- Related Publications
- Obtaining Documentation
- Obtaining Technical Assistance
- Obtaining Additional Publications and Information
- Overview
- Installing the Access Point
- Configuring the Access Point for the First Time
- Using the Web-Browser Interface
- Using the Command-Line Interface
- Mounting Instructions
- 2.4 GHz Radio Upgrade
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Access Point Specifications
- Channels and Antenna Settings
- Glossary
- Index
First Draft - CISCO CONFIDENTIAL
C-2
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
OL-4309-02
Appendix C Access Point Specifications
Radio 2.4-GHz Radio
Power Output With IEEE 802.11b-compliant radio:
100, 50, 30, 20, 5, or 1 mW (at 1, 2, 5.5, and 11Mbps)
With IEEE 802.11g-compliant radio:
100, 50, 30, 20, 5, or 1 mW (at 1, 2, 5.5 and 11 Mbps)
30, 20, 10, 5, or 1 mW (at 6, 9, 12, 18, 24, 48, and 54 Mbps)
(Depending on the regulatory domain in which the access point is installed)
Frequency 2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is installed)
Range Indoor:
IEEE 802.11b-compliant radio:
150 ft (45 m) at 11 Mbps
400 ft (122 m) at 1 Mbps
IEEE 802.11g-compliant radio:
TBD at 36 Mbps
TBD at 54 Mbps
Outdoor:
IEEE 802.11b-compliant radio:
800 ft (244 m) at 11 Mbps
2000 ft (610 m) at 1 Mbps
IEEE 802.11g-compliant radio:
TBD at 36 Mbps
TBD at 54 Mbps
Modulation Direct Sequence Spread Spectrum (DSSS)
Data rates IEEE 802.11b-compliant radio:
1, 2, 5.5, and 11 Mbps
IEEE 802.11g-compliant radio:
1, 2, 5.5, and 11 Mbps
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Antenna A diversity system with two integrated 2.2 dBi dipole antennas.
Table C-1 Access Point Specifications (continued)
Category Specifications