User's Manual

F-90
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Appendix F Performing a Site Survey
Using Thresholds
Enabling the Proximity Beeper
To enable the proximity beeper, choose Enable Proximity Beeper from the Action drop-down menu or
press F6. When the beeper is enabled, a check mark appears next to the Enable Proximity Beeper menu
option, and PRX appears in the site survey utility’s status bar.
Note To disable the proximity beeper, choose the Enable Proximity Beeper menu option again so that the
check mark disappears or re-press F6.
Using Thresholds
You can perform these threshold-related functions:
• Configure threshold values, F-90
• Enable threshold triggers, F-93
• Enter a comment in the threshold log file, F-94
• View the threshold log file, F-94
• Delete the threshold log file, F-95
Follow the instructions on the pages indicated to perform these functions.
Configuring Threshold Values
Follow these steps to configure threshold values that trigger audible alerts, entries in the threshold log
file, or both.
Step 1 Choose Configure Thresholds from the site survey utility’s Thresholds drop-down menu. The
Threshold Logging Configuration window appears (see Figure F-9).