User's Manual

5-39
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Step 6 If you chose TLS Client Certificate in Step 3, refer to “Enabling EAP-TLS” on page 5-45 (Step 5 to
Step 10) to configure the options in the Configure TLS Client Certificate window (Figure 5-11).
Figure 5-11 Configure TLS Client Certificate Window
Step 7 In the Select One or More PAC Authorities list, select the PAC authorities and PAC authority groups that
are associated with the network defined by the profile’s SSID. The list contains the names of all the
authentication servers from which you have previously provisioned a PAC.
If the Select One or More PAC Authorities list is empty or does not contain the name of a desired PAC
authority, go to Step 8 to import a PAC file.
Note This step is required for manual PAC provisioning but optional for automatic PAC provisioning.
If automatic provisioning is enabled, automatic provisioning will be initiated during the
authentication process of the EAP-FAST profile if no PAC authority was selected, the PAC could
not be found, or the specified PAC does not match the server ID.