User's Manual

5-49
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Step 2 Click Configure. The Configure PEAP (EAP-GTC) window appears (see Figure 5-16).
Figure 5-16 Configure PEAP (EAP-GTC) Window
Step 3 Check the Use Machine Information for Domain Logon check box if you want the client to attempt to
log into a domain using machine authentication with user credentials rather than user authentication.
Doing so enables your computer to connect to the network prior to user logon. The default setting is
checked.
Note If you do not check the Use Machine Information for Domain Logon check box, machine
authentication is not performed. Authentication does not occur until you log on.
Step 4 Check the Validate Server Identity check box to force the system to validate the identity of the server
as an added level of security. If you uncheck this box, only user credentials will be validated.
Step 5 Choose the certificate authority from which the server certificate was downloaded in the Trusted Root
Certification Authorities drop-down box, or, if applicable, choose <Any>.
Step 6 Choose either Token or Static Password, depending on your user database.