User's Manual

5-63
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Chapter 5 Configuring the Client Adapter
Setting Roaming Parameters in the Windows Control Panel
Setting Roaming Parameters in the Windows Control Panel
The Cisco Aironet 802.11a/b/g Wireless Adapter Properties window (see Figure 5-24) in the Windows
Control Panel enables you to set two parameters that regulate the client adapter’s roaming capabilities.
Figure 5-24 Cisco Aironet 802.11a/b/g Wireless Adapter Properties Window
Follow these steps to access the roaming parameters.
Step 1 Double-click My Computer, Control Panel, and System.
Step 2 Click the Hardware tab and Device Manager.
Step 3 Double-click Network Adapters.
Step 4 Right-click Cisco Aironet 802.11a/b/g Wireless Adapter.
Step 5 Click Properties and the Advanced tab. The roaming parameters appear in the Property list. Table 5-5
lists and describes the client adapter’s roaming parameters. Follow the instructions in the table to change
the parameters.