User's Manual

6-7
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Chapter 6 Using EAP Authentication
Using LEAP or EAP-FAST with an Automatically Prompted Login
After a Reboot or Logon
After your computer reboots or you log on, follow these steps to authenticate using LEAP or EAP-FAST.
Step 1 When the Windows login window appears, enter your Windows username and password and click OK.
Step 2 When the Enter Wireless Network Password window appears (see Figure 6-4), enter your LEAP or
EAP-FAST username and password and click OK. The domain name can be entered in the Log On To
field; it is optional.
Figure 6-4 Enter Wireless Network Password Window
The LEAP or EAP-FAST Authentication Status window appears.
Step 3 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
a PAC, click Ye s.
Step 4 If your client adapter authenticates, the window shows that each stage was successful and then
disappears. The logon or boot-up process completes.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the “Error Messages” section on page 10-12 for the necessary action to take.