User's Manual

Contents
v
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
CHAPTER 5 Configuring the Client Adapter 5-1
Overview 5-2
Setting General Parameters 5-3
Setting Advanced Parameters 5-6
Setting Security Parameters 5-14
Overview of Security Features 5-14
Static WEP Keys 5-15
EAP (with Dynamic WEP Keys) 5-15
WPA and WPA2 5-19
CCKM Fast Secure Roaming 5-20
Reporting Access Points that Fail LEAP Authentication 5-20
Additional WEP Key Security Features 5-21
Synchronizing Security Features 5-22
Enabling Static WEP 5-26
Enabling WPA/WPA2 Passphrase 5-28
Enabling LEAP 5-29
Enabling EAP-FAST 5-34
Enabling EAP-TLS or PEAP 5-44
Enabling EAP-TLS 5-45
Enabling PEAP (EAP-GTC) 5-48
Enabling PEAP (EAP-MSCHAP V2) 5-52
Enabling PEAP (EAP-MSCHAP V2) Machine Authentication with Machine Credentials 5-55
Configuring Advanced Settings 5-58
Disabling Static WEP, WPA/WPA2 Passphrase, or EAP 5-58
Enabling Wi-Fi Multimedia 5-59
Enabling the QoS Packet Scheduler on Windows 2000 5-59
Enabling the QoS Packet Scheduler on Windows XP 5-62
Setting Roaming Parameters in the Windows Control Panel 5-63
Configuring Band Usage 5-65
CHAPTER 6 Using EAP Authentication 6-1
Overview 6-2
Using LEAP or EAP-FAST 6-2
Using LEAP or EAP-FAST with the Windows Username and Password 6-3
After Profile Activation or Card Insertion 6-4
After a Reboot or Logon 6-4
After Your EAP-FAST Password Expires 6-5
Using LEAP or EAP-FAST with an Automatically Prompted Login 6-6