User's Manual

F-100
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Appendix F Performing a Site Survey
Using AP Scanning
Deleting the AP Scan Log
Follow these steps to delete the AP scan log file.
Step 1 Choose Delete AP Scan Log from the AP Scanning drop-down menu.
Note The Delete AP Scan Log menu option is disabled if the log file does not exist.
Step 2 Click Yes when asked to confirm your decision.
Saving the AP Scan List
Follow these steps to save the current contents of the AP scan list to a file.
Step 1 Choose Save AP Scan List from the AP Scanning drop-down menu. The Save As window appears (see
Figure F-14).
Note The Save AP Scan List option is available only if the AP Scan List tab is selected.
Figure F-14 Site Survey Utility - Save As Window
Step 2 From the Save in drop-down box, choose the location where you want to save the AP scan list file.
Note The initial default location is the directory where the site survey utility is installed. However,
after you save the AP scan list file the first time, the default directory becomes the one that was
last used to open or save the AP scan list file.