User's Manual

5-58
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Configuring Advanced Settings
To specify a server or domain name and a login name to use for authenticating user credentials (see
Figure 5-19), follow these steps:
Figure 5-19 Configure Advanced Settings
Step 1 Leave the Specific Server or Domain field blank to allow the client to accept a certificate from any server
that supplies a certificate signed by the selected certificate authority or enter the domain name of the
server from which the client will accept a certificate.
Step 2 If the Login Name field is not filled in automatically, enter your username with nothing after it (for
example, jsmith).
Step 3 Click OK to save your settings.
Disabling Static WEP, WPA/WPA2 Passphrase, or EAP
To disable static WEP, WPA/WPA2 passphrase, or EAP authentication [LEAP, EAP-FAST, EAP-TLS,
PEAP (EAP-GTC), or PEAP (EAP-MSCHAP V2)] for a particular profile, choose None on the Profile
Management (Security) window and click OK.
Note Choosing any security option other than Pre-Shared Key (Static WEP) on the Profile Management
(Security) window disables static WEP automatically.
Note Choosing Pre-Shared Key (Static WEP) or WPA/WPA2 Passphrase on the Profile Management
(Security) window disables EAP automatically.