User's Manual

CISCO CONFIDENTIAL - Draft 2
C-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Appendix C Access Point Specifications
Power Output With 802.11b radio:
100, 50, 30, 20, 5, or 1 mW
With 802.11g radio:
100, 50, 30, 20, 5, or 1 mW
(at 1, 2, 5.5, and 11 Mbps)
30, 20, 10, 5, or 1 mW
(at 6, 9, 12, 18, 24, 48, and 54 Mbps)
(Depending on the regulatory domain in
which the access point is installed)
RM20A radio module:
16 dBm
13 dBm
10 dBm
7 dBm
RM21A radio module or RM22A radio module:
17 dBm
15 DBm
14 dBm
11 dBm
10 dBm
8 dBm
5 dBm
2 dBm
-1 dBm
Note These values are based on the FCC peak
measurement method as defined in
FCC 15.407 (A)(4)
(Depending on the regulatory domain in which the
access point is installed)
Antenna A diversity system with two reverse-TNC
connectors for external antennas (Cisco
antennas are sold separately).
RM20A radio module:
A diversity system consisting of two integrated
4.5 dBi omnidirectional gain or two integrated
6 dBi directional gain depending on the
positioning of the antenna.
RM21A radio module:
A diversity system consisting of a dipole array
providing 5 dBi omnidirectional gain or 9 dBi
directional gain depending on the positioning of
the antenna.
RM22A radio module:
A diversity system with two reverse-TNC
antenna connectors for external antennas (Cisco
antennas are sold separately).
Table C-1 Access Point Specifications (continued)
Category Access Point with 802.11b or 802.11g Radio Access Point with 802.11a Radio Module