User's Manual
Table Of Contents
- Cisco Aironet 1200 Series Access Point Hardware Installation Guide
- Contents
- Preface
- Overview
- Installing the Access Point
- Configuring the Access Point for the First Time
- Using the Web-Browser Interface
- Using the Command-Line Interface
- Mounting Instructions
- 2.4-GHz Radio Upgrade
- 5-GHz Radio Module Upgrade
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Department of Communications—Canada
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Aironet Access Points in Japan
- Administrative Rules for Cisco Aironet Access Points in Taiwan
- Declaration of Conformity Statements
- Declaration of Conformity Statements for European Union Countries
- Access Point Specifications
- Channels and Antenna Settings
- Console Cable Pinouts
- Glossary
- Index
CISCO CONFIDENTIAL - Draft 2
C-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Appendix C Access Point Specifications
Typical Range Indoor (across office cubicle walls):
802.11b radio:
(100 mW output power)
350 ft at 1 Mbps
150 ft at 11 Mbps
802.11g radio:
(100 mW output power)
410 ft ( 125.0 m) at 1 Mbps
270 ft ( 82.3 m) at 2 Mbps
220 ft ( 67.1 m) at 5.5 Mbps
160 ft ( 48.8 m) at 11 Mbps
(30 mW output power)
300 ft ( 91.4 m) at 6 Mbps
210 ft (67.1 m) at 12 Mbps
180 ft (54.9 m) at 18 Mbps
90 ft ( 27.4 m) at 54 Mbps
Outdoor:
802.11b radio
(100 mW output power):
2000 ft at 1 Mbps
800 ft at 11 Mbps
802.11g radio:
(100 mW output power)
2000 ft (609.6 m) at 1 Mbps
1000 ft (304.8 m) at 11 Mbps
(30 mW output power)
1300 ft (396.2 m) at 6 Mbps
600 ft (182.9 m) at 18 Mbps
250 ft (76.2 m) at 54 Mbps
Note Using 2.2dBi antennas at the access
point and the client adapter.
Indoor (across office cubicle walls):
RM20A radio module:
165 ft (50.3 m) at 6 Mbps
130 ft (39.6 m) at 12 Mbps
110 ft (33.5 m) at 18 Mbps
45 ft (13.7 m) at 54 Mbps
Note Using 40mW output power with 6 dBi
antennas at the access point and client
adapter.
RM21A radio module or RM22A radio module:
TBD ft (TBD m) at 6 Mbps
TBD ft (TBD m) at 12 Mbps
TBD ft (TBD m) at 18 Mbps
TBD ft (TBD m) at 54 Mbps
Outdoor:
RM20A radio module:
1000 ft (304.8 m) at 6 Mbps
100 ft (30.5 m) at 54 Mbps
Note Using 40mW output power with 6 dBi
antennas at the access point and client
adapter.
RM21A radio module or RM22A radio module:
TBD ft (TBD m) at 6 Mbps
TBD ft (TBD m) at 54 Mbps
Compliance The 1200 series access point complies with UL 2043 for products installed in a building’s
environmental air handling spaces, such as above suspended ceilings.
Caution The 1200 series power injectors and power modules are not tested to UL 2043 and should
not be placed in a building’s environmental air space, such as above suspended ceilings.
Note If you plan to mount the access point in environmental air space using a 802.11a radio, Cisco
recommends that you mount the access point horizontally with its antennas pointing down.
Doing so results in the access point complying with regulatory requirements for
environmental air space with an 802.11a radio installed.
Table C-1 Access Point Specifications (continued)
Category Access Point with 802.11b or 802.11g Radio Access Point with 802.11a Radio Module