User's Manual

7-8
Cisco Aironet 1200 Series Access Point Installation and Configuration Guide
OL-3446-01
Chapter 7 Configuring Radio Settings
Configuring Radio Channel Settings
Step 3
channel
frequency | least-congested
Set the default channel for the access point radio. To search for the
least-congested channel on startup, enter least-congested.
These are the available frequencies (in MHz) for the 2.4-GHz
radio:
• channel 1—2412 (Americas, EMEA, Japan, and China)
• channel 2—2417 (Americas, EMEA, Japan, and China)
• channel 3—2422 (Americas, EMEA, Japan, Israel, and China)
• channel 4—2427 (Americas, EMEA, Japan, Israel, and China)
• channel 5—2432 (Americas, EMEA, Japan, Israel, and China)
• channel 6—2437 (Americas, EMEA, Japan, Israel, and China)
• channel 7—2442 (Americas, EMEA, Japan, Israel, and China)
• channel 8—2447 (Americas, EMEA, Japan, Israel, and China)
• channel 9—2452 (Americas, EMEA, Japan, Israel, and China)
• channel 10—2457 (Americas, EMEA, Japan, and China)
• channel 11—2462 (Americas, EMEA, Japan, and China)
• channel 12—2467 (EMEA and Japan only)
• channel 13—2472 (EMEA and Japan only)
• channel 14—2484 (Japan only)
These are the available frequencies (in MHz) for the 5-GHz radio:
• channel 34—5170 (Japan only)
• channel 36—5180 (Americas and Singapore)
• channel 38—5190 (Japan only)
• channel 40—5200 (Americas and Singapore)
• channel 42—5210 (Japan only)
• channel 44—5220 (Americas and Singapore)
• channel 46—5230 (Japan only)
• channel 48—5240 (Americas and Singapore)
• channel 52—5260 (Americas and Taiwan)
• channel 56—5280 (Americas and Taiwan)
• channel 60—5300 (Americas and Taiwan)
• channel 64—5320 (Americas and Taiwan)
Note The frequencies allowed in your regulatory domain might
differ from the frequencies listed here.
Step 4
end Return to privileged EXEC mode.
Step 5
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Command Purpose