User's Manual

4/1/05 Adding an Outdoor Area to a Campus
OL-7426-02
- Click OK to save the Building definition to the Cisco WCS database.
• Repeat this section for any remaining Standalone Buildings.
When you have completed this section for all Standalone Buildings, continue with Adding Floor Plans to
a Standalone Building.
Adding an Outdoor Area to a CampusAdding an Outdoor Area to a Campus
You can add Outdoor Areas to a Campus in the Cisco WCS database whether or not you have added
Outdoor Area maps to the Cisco WCS database.
To add a building to the Cisco WCS database without associating it with a Campus, continue with
Adding a Standalone Building to the Cisco WCS Database. To add a building to a Campus in the Cisco
WCS database, continue with Adding a Building to a Campus. Otherwise, add an Outdoor Area to a
Campus by performing the following steps:
• If desired, save Outdoor Area maps in .PNG, .JPG, .JPEG, or .GIF format. Note that you do not
need to have a map for the Outdoor Area map(s). The maps can be any size, as Cisco WCS
automatically resizes the map(s) to fit in its working areas.
• Browse to and import the map(s) from anywhere in your file system.
• Select the Monitor Tab.
• Click Maps to have Cisco WCS display the Maps page.
• In the Maps Page, select the desired Campus.
The Cisco WCS User Interface displays the Maps > <Campus Name> page.
• In the Maps > <Campus Name> page Button Area, select New Outdoor Area.