User's Manual

4/1/05 Adding Floor Plans to a Campus Building
OL-7426-02
on the Campus map. Note that there will be a hyperlink associated with the Building
Name or Outdoor Area.
• Repeat this section for any remaining Outdoor Areas.
When you have completed this section for all Outdoor Areas, continue with Using the Cisco Wireless
Control System.
Adding Floor Plans to a Campus BuildingAdding Floor Plans to a Campus Building
Once you have added a Building to a Campus as described in Adding a Building to a Campus, you can
add individual floor plan and basement maps to the Building. Proceed with the following:
• If not already done, save your floor plan map(s) in .FPE, .PNG, .JPG, or .GIF format. They can
be any size, as Cisco WCS automatically resizes the map(s) to fit in its working areas.
• Browse to and import the map(s) from anywhere in your file system.
• Select the Monitor Tab.
• Click Maps to have Cisco WCS display the Maps page.
• In the Maps Page, select the desired Campus.
Note: When you are importing a .FPE floor plan map, you will also need to import a
corresponding .PNG, .JPG, or .GIF format floor plan map. Importing the .PNG, .JPG,
or .GIF format floor plan map allows Cisco WCS to correctly display the floor plan,
and importing the .FPE floor plan map allows Cisco WCS to properly adjust the RF
signal strengths as modified by the walls and other RF obstructions.