User's Manual

4/1/05 Adding Floor Plans to a Standalone Building
OL-7426-02
• In the <Building Name> > New Floor page, you can add floors to a Building to organize
related Floor Plan maps. To do this:
- Enter the Floor or Basement Name.
- Enter the Floor or Basement Contact Name.
- Select the Floor or Basement number.
- Enter the Floor-to-Floor Height in feet.
- If you are importing a .FPE floor plan map file from the Floor Plan Editor, check the
Import FPE File box. Otherwise, leave this box unchecked.
Also, when you are importing a .FPE floor plan map file from the Floor Plan Editor, click
Browse to search for and select the .FPE desired Floor or Basement graphic name.
- In all cases, click Browse to search for and select the desired Floor or Basement
graphic name. Note that when you select the Floor or Basement graphic, Cisco WCS
displays the graphic in the Building-sized grid.
- Enter an approximate Floor or Basement Horizontal Span and Vertical Span (width and
depth on the map) in feet. Note that these numbers should be smaller than or the same
as the Building Horizontal Span and Vertical Span in the Cisco WCS database.
- If necessary, click Place to locate the Floor or Basement graphic on the Building grid.