User's Manual

4/1/05 Troubleshooting Tips
OL-7426-02
Client Status CodesClient Status Codes
The Client Status code may be any of the following:
Using Cisco 1000 Series Lightweight Access Point LEDsUsing Cisco 1000 Series Lightweight Access Point LEDs
8 disassociationStaHasLeft Operating System moved the client to another
Cisco 1000 Series lightweight access point using
non-aggressive load balancing
9 staReqAssociationWithoutAuth client not authorized yet, still attempting to
associate with an Cisco 1000 Series lightweight
access point
99 missingReasonCode client momentarily in an unknown state
Table - Client Status Code Descriptions and Meanings
Client
Status
Code
Description Meaning
0 idle normal operation -- no rejections of client associ-
ation requests
1 aaaPending completing an aaa transaction
2 authenticated 802.11 authentication completed
3 associated 802.11 association completed
4 powersave client in powersave mode
5 disassociated 802.11 disassociation completed
6 tobedeleted to be deleted after disassociation
7 probing client not associated or authorized yet
8 disabled automatically disabled by Operating System for an
operator-defined time
Table - Cisco 1000 Series Lightweight Access Point LED Conditions and Status
LED Conditions
Status
Power Alarm 2.4 GHz 5 GHz
Green ON off on or off on or off
Cisco Wireless LAN Controller found, code OK,
normal status.
Table - Client Reason Code Descriptions and Meanings (Continued)
Client
Reason
Code
Description Meaning