User's Manual

26
Quick Start Guide: Cisco Aironet 1500 Series Lightweight Outdoor Mesh Access Point
78-17229-01
Chapter 3 Installation Instructions
Installation Options
10. Select a mounting location. You can attach the outdoor access point to any light pole upright or arm
with between XXX and YYY inches in diameter.
11. Loosely assemble the rest of the pole mount kit components AROUND THE POLE. Figure 3-11
shows the pole clamp subassembly attached to a pole.
12. Use a pocket level to verify that the top edge of the pole clamp subassembly is horizontal, and
tighten its adjustment screws.
Note Snug the screws to ZZZZ inch pounds. If you overtighten the pole clamp screws, you will bend
the clamps.
Figure 3-11 Pole Clamp Subassembly Mounted on a Pole
13.
If necessary, use a hacksaw or cutoff wheel to remove any excess bolt length. (The bolts can protrude
1 to 3 inches and still allow the final pole mount assembly to swivel and rotate.