User's Manual
Table Of Contents
- PRELIMINARY Quick Start Guide: Cisco Aironet 1500 Series Lightweight Outdoor Mesh Access Point
- Contents
- Preface
- Overview
- Installation Overview
- Installation Instructions
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Glossary
27
Quick Start Guide: Cisco Aironet 1500 Series Lightweight Outdoor Mesh Access Point
78-17229-01
Chapter 3 Installation Instructions
Installation Options
14. Use the last two screw and lock washer sets to loosely assemble the outdoor access point to the pole
clamp subassembly as shown in Figure 3-12.
Note Make sure to leave the screws somewhat loose so you can adjust the outdoor access point
orientation.
Figure 3-12 Attaching the Outdoor Access Point to the Pole Clamp Subassembly (pole not shown)
15.
If necessary, rotate the outdoor access point until it is level. Use a pocket level to verify that the top
edge of the outdoor access point is horizontal, and tighten all four of its adjustment screws.
Note Snug the screws to ZZZZ inch pounds. If you overtighten the adjustment screws, you can twist
the captive T-nuts loose.
16. Continue with the Rooftop Installations, page 3-14 or Pole-Top Installations, page 3-15 procedure.