User Manual

REVIEW DRAFT—CISCO CONFIDENTIAL
C-1
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-03
APPENDIX
C
Access Point Specifications
Table C-1 lists the technical specifications for the Cisco Aironet 1520 Series Outdoor Mesh Access
Point.
Ta b l e C-1 Access Point Specifications
Category Specifications
Size 12.0 in. x 7.8 in. x 6.0 in. (30.5 cm x 19.8 cm x 15.2 cm)
Weight 17.3 lbs. (7.8 kg) with dual radios
Connectors Two or three Type N antenna connectors for 2.4-GHz radio (depends on configuration)
One Type N antenna connector (for 5-GHz radio)
Optional AC power connector—3-pin Remke Mini-Link 50908 connector
Internal PoE-in connector (Uplink port)—RJ-45 connector
Internal PoE-out connector (Downlink port)—RJ-45 connector
Optional internal SFP fiber module—Single strand LC fiber connector
Optional cable connector—Stinger connector (customer supplied)
Power sources
(see Table C-2 and
Table C-3 for power
distribution budget)
AC power
Input volts—100 to 480 VAC 50 to 60 Hz
Power injector
Input volts—85 to 264 VAC 50 to 60 Hz
POC (Quasi-square wave AC)
Input volts—40 to 90 Vrms
External 12 VDC
Input volts—12 VDC
Operating temperature Access point and power injector
–40 to 131
o
F (–40 to 55
o
C)
Note Up to a 20-minute start-up time might be necessary when using a cable modem at
temperatures of –20 or less.
Storage temperature Access point
–40 to 185
o
F (–40 to 85
o
C)
Power injector
–58 to 185
o
F (–50 to 85
o
C)