User Manual

REVIEW DRAFT—CISCO CONFIDENTIAL
3-9
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-03
Chapter 3 Troubleshooting
Access Point Power Injector
Step 3 When finished, remove your serial cable, and close the hinged cover (see the “Closing the Access Point
Hinged Cover” section on page 2-39 for instructions).
Access Point Power Injector
The power injector (AIR-PWRINJ1500-2=) has three LEDs on the front end of the case (see Figure 3-3).
Figure 3-3 Power Injector Connectors and LEDs
1 Mounting tab 4 AC power LED
2 Access point power LED 5 Ethernet connector (RJ-45) to access point
(10/100/1000BASE-T)
3 Fault LED 6 Ethernet connector (RJ-45) to switch (10/100/1000BASE-T)
211485
231484
1
12 3 4 5 6