User Manual

REVIEW DRAFT—CISCO CONFIDENTIAL
2-57
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-03
Chapter 2 Mounting Instructions
Powering the Access Point
Step 9 Connect the streetlight power tap adapter to the access point AC power connector, as shown in
Figure 2-33. Hand-tighten the connector.
Figure 2-33 AC Power Connector
Step 10 Plug the streetlight power tap adapter into the outdoor light control fixture, as shown in Figure 2-32.
Step 11 Plug the outdoor light control into the streetlight power tap adapter.
Step 12 Ensure that the antennas are connected to the access point before you apply power to the access point.
Step 13 Turn on the power to the outdoor light control fixture at the designated circuits.
1 AC power connector