User Manual

REVIEW DRAFT—CISCO CONFIDENTIAL
2-28
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-03
Chapter 2 Mounting Instructions
Mounting the Access Point
Step 11 Screw a M8 x16 bolt (without a flat or lock washer) in the top support bolt hole on each side the access
point (see Figure 2-14). Do not screw the bolt all the way in. Leave a gap of approximately 0.25 in
(0.635 cm).
Figure 2-14 Location of Access Point Top Support Bolt Hole
1 Ground lug screw holes location 3 Second bolt hole location
2 M8 x16 bolt (without flat or lock washers)
(supplied with pole mount kit)