User's Manual
Table Of Contents
- 1 About this Guide
- 2 Safety Instructions
- 3 Unpacking
- 4 Overview
- 5 Configuring the Bridge for the First Time
- Before You Start
- Resetting the Bridge to Default Settings
- Obtaining and Assigning an IP Address
- Connecting to the Bridge Locally
- Assigning Basic Settings
- Default Settings on the Express Setup Page
- What To Do Next
- Output Power Level
- Protecting Your Wireless LAN
- Assigning an IP Address Using the CLI
- Using a Telnet Session to Access the CLI
- 6 Mounting the Bridge
- 7 Troubleshooting
- 8 Declarations of Conformity and Regulatory Information
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Industry Canada
- Canadian Compliance Statement
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
- Declaration of Conformity for RF Exposure
- Declaration of Conformity Statements
- 9 Bridge Specifications
35
THIRD FCC DRAFT (CISCO CONFIDENTIAL)
Step 8 Enter the filename for the bridge image file (c1410-k9w7-tar.122-13.JA.tar) in the Upload
New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root
directory, include the relative path of the TFTP server root directory with the filename. If the
file is in the TFTP root directory, enter only the filename.
Step 9 Click Upl
oad.
For additional information click the Help icon on
the Software Upgrade screen.
Obtaining the Bridge Image File
You can obtain the bridge image file from the Cisco.com software center by following these steps:
Step 1 Use your web browser to go to the Cisco Software Center at the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2 Sel
ect Option #1: Aironet Wireless Software Selector.
Step 3 For the
Product Type, select Wireless Bridge and click Submit.
Step 4 Sel
ect 1430 Series for the model number and click Submit.
Step 5 Sel
ect Current Release (Recommended) and click Submit.
Step 6 Sel
ect c1410-k9w7-tar.122-13.JA.tar, which is the bridge image file.
Step 7 On t
he Encryption Authorization Form, enter the requested information, read the encryption
information, and check the boxes that apply. Click Submit.
Step 8 Re
ad and accept the terms and conditions of the Software License Agreement.
Step 9 Sel
ect the bridge image file again to download it.
Step 10 Sav
e the file to a directory on your hard drive and then exit the Internet browser.
Obtaining the TFTP Server Software
You can download TFTP server software from several web sites. Cisco recommends the shareware
TFTP utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.